G'Five President Shark 3 SPD7715 NAND Firmware / Flash File
==== Wait for phone...Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!
[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name : skytek_wg3588
Model Brand : GFIVE
Model Device: skytek_wg3588
AndrVersion : 4.4.2
Project Ver : GFIVE_President_Shark_3-2015.06.02
Model Ext : GFIVE President Shark 3
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img
AndroidInfo created
Firmware Size : 322 MiB
Saved to : C:\Users\Marhaba Lab\
Free firmware Without password
How To Flash:
its a PAC flash file Read With CM2 Box and you can flash it with CM2 box only.
Open the CM2SPD Tool.
Select CPU Boot Which supports you mobile phone.
Click flash button and Select Pac option.
Browse file which’s name is (SC77xx_FLASH_CONF.pac)
Now click flash button
Plug-in the USB cable to phone to connect it to your PC.
The process will be started,
Wait for a few minutes Till Your Device Restarted.
its Done enjoy
