XTOUCH X3mini MT6572 Firmware


Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D420158F0C6A641C9
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D420158F0C6A641C9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x0D22E22814AF104F8C0B853BC981431E
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : XTOUCH
ProdName  : X3mini
ProdModel : X3mini
Device    : X3mini
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_mbk72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / mbk72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 717 MiB
Scatter saved to : 
preloader_mbk72_wet_jb3.bin ( 97.5Kb )
Free firmware
[post_ad]
How To Flash:
  • Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
  • Select “scatter-Loading” and Slect MT65XX_Android_scatter.txt in folder
  • Wait file to be added into Flash Tool Or Any Flashing box
  • Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
  • Turn off your phone
  • Press “Download” Button to start
  • And connect your phone with PC via USB data cable.
  • The process will start and a red progress bar will appear after color purple, yellow.
  • And green circles display
  • Finish !
  • You can now safely disconnect your phone and turn it on.
  • its Done..!
Full Tutorial Here
Join Us For Updates!