Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 31B0F4DE17E52FEBF9C976B6FF6A51FA
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FF0000 , 0x00010000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
Reading Flash Content now ...
Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info : KEYTAK60A_64_11B_PCB01_gprs_MT6260_S00.MAUI_11B_W13_08_MP_V3_F5.bin
FileVersion : MAUI.11B.W13.08.MP.V3.F5
[ScatCFG] : MT6260 / MAUI.11B.W13.08.MP.V3.F5 / NOR , SF
Firmware saved to :
KEYTAK60A_64_11B_PCB01_gprs_MT6260_S00 Scatter File
Free firmware Without password
[post_ad]
How To Flash MTK Feature Phone:
- Its a Scatter file you can flash it with Flash Tool or any Flasher Box
- Select “scatter-Loading” and Slect XXXX_cfg in folder
- Wait file to be added into Flash Tool Or Any Flashing box
- Turn off your phone
- Press “Download” Button to start
- And connect your phone with PC via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
- its Done..!
